Chapter 1 - Masterlogic components
The following image illustrates the main base of ML200-IEC.
Figure 1: Main base of ML200-IEC
The following table lists the details of the main base.
Table 10: Details of main base
Index Part
1
Base attached guide
hole
2
Power module
connector
3
Module built-in
connector
4
FG terminal
5
Expansion cable
connector
6
CPU module
connector
ML200-IEC Expansion base
The expansion base consists of the power module, I/O module, special module, and the communication
module.
ATTENTION
2MLI CPUS/P does not support the Expansion base.
The following table lists the types of expansion bases for ML200-IEC.
Table 11: Types of expansion bases for ML200-IEC
Function
For attaching the main base to the panel in the control
panel.
For installation of Power supply module.
For installation of I/O, special and other communication
modules.
The ground terminal connected to the shielded pattern
of the PCB board.
Connects the main base (CPU base) with the
expansion base.
For installation of the CPU module.
- 9 -