Example Of Mixed Topology (Combination Of Electric And Optic Fiber) - Honeywell ML200 Series Installation And Commissioning Manual

Item ML200R Comprises of
of I/O points) is assigned to main base and main base has station number of 0.
Address in
main base
ATTENTION
The base has its base number as '0' and the expansion base has a switch to set the base
l
number.
The CPU module is only allowed in the main base and two slots are required for the CPU
l
module.
The module starts operating after the module type and I/O parameter are set using
l
SoftMaster and the correct module type is mounted on the base.

Example of mixed topology (combination of electric and optic fiber)

ML200R with dual I/O link redundancy using mixed modules.
In a system, the optical modules can be used in the following two cases. This helps to build an
optical/electrical mixed module network without an additional converter.
When the distance between electrically established stations is more.
l
Electrical noise is severe.
l
2MLR-CPUH/T for both CPUs and 2MLR-DBDT and 2MLR-DBDH for expansion drive module.
Chapter 3 - Plan and Install MLPLC
- 41 -