Description Files For Fieldbus Configuration - Siemens SINAMICS G120C Getting Started

Installing

3.4 Description files for fieldbus configuration

Communication with the higher-level control via CANopen
See also section: Description files for fieldbus configuration (Page 18).
3.4 Description files for fieldbus configuration
Description file Note
GSD for The General Station
PROFIBUS Description (GSD) file
describes the characteristics
of the converter in a
PROFIBUS network.
GSDML for The General Station
PROFINET Description (GSDML) file
describes the characteristics
of the converter in a
PROFINET network.
EDS for The EDS file for CAN is
CANopen required to operate the
converter as a node on a CAN
bus and announce the device
to the configuration tool.
18
Download
Internet:
(http://support.automation.si
emens.com/WW/view/en/22
339653/133100)
Internet:
(http://support.automation.si
emens.com/WW/view/en/26
641490)
Internet:
(http://support.automation.si
emens.com/WW/view/en/48
351511)
Getting Started, 03/2012, FW V4.5, A5E03831830B AA
Alternative
The GSD is saved in the converter. The
converter writes its GSD to the memory
card if you insert the memory card in the
converter and set p0804 to 12. Using the
memory card, you can then transfer the
GSD to your PG/your PC.
The GSDML is saved in the converter.
The converter writes its GSDML to the
memory card if you insert the memory
card in the converter and set p0804 to
12. Using the memory card, you can then
transfer the GSDML to your PG/your PC.
---
SINAMICS G120C frequency converter