Part 5 : Problem & Solution - Modena RX Series Manual

Please perform checking procedure on the following things before contacting MODENA service center
when troubleshooting occurs:
PROBLEM
Reduced suction
power.
Motor stop working
after a while.
Light on, but fan
does not work.
Both light and fan
do not work.
Serious Vibration
of the unit.
Suction
performance not
good.
Part 5:
Problem & Solution
CAUSE
Dirty aluminum / acrylic filter.
Dirty carbon filter.
Safety thermal regulator is active.
The fan blade is jammed.
The motor is damaged.
Light bulb is burn.
Power cord looses.
The fan blade is damaged.
The fan motor is not fixed tightly.
The unit is not hung properly on
the bracket.
Too long distance between the unit
and the cooking plane.
SOLUTION
Clean the aluminum filter, dry it and
place it back on the vent hood.
Replace the carbon filter foam with
a new one.
The vent hood is installed too close
to the stove.
Air circulation is not optimal.
Contact MODENA Service Center.
Switch of the unit and Contact
MODENA Service Center.
Replace the bulb with correct
rating.
Plug in to the power supply again.
Switch of the unit.
Contact MODENA Service Center.
Take down the unit and check
whether the bracket is in proper
location.
Readjust the distance to 65-75cm.
21
English