3-26
When Enabled the Super Password can be used to access the systems
configuration. (The super password is set as "02161997".)
Disabling Super Password
Since the Super Password can be read from the menu, it can be disabled by the
following command:
UNIT CONFIG > SUPER PSW > DISABLE><Enter and hold>
Once the super password is disabled, only the regular password is accepted.
Please note that if you forget the password no other way except opening
the case can be used to clear the password. See In Case You Forget the
Password section.
Restart the Switch
In case you want to reset the Desktop Switch FSD-1020 Switch, simply enter
the command:
UNIT CONFIG > SYS RESTART ><Enter and hold>
The command will reset the switch and the data in EEPROM will not be reset
to default value.
Restart the Switch in the event that it does not behave normally.
Restore System Setting
In case you want to set the system setting to the default value, simply enter the
command:
Operation
PLANET Desktop Switch