Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose.
Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision PLANET 8-Port 10/100Mbps PoE Fast Ethernet Switch User’s Manual For Model: FSD-808P REVISION: 2.1 (JANUARY, 2015) Part No.: 2351-A31190-005...
1.2 Product Description To fulfill the demand of sufficient PoE power for network applications with Fast Ethernet transmission performance, the FSD-808P, a new member of the 802.3af PoE Fast Ethernet Switch family, is an 8-port 10/100Mbps Power over Ethernet Switch, which features high performance Fast Ethernet IEEE 802.3af PoE (up to 15.4 watts) with a total of 125-watt PoE budget.
1.3 Features RJ45 Interface Eight 10/100Mbps Fast Ethernet ports 8 ports support 48V DC power to PoE powered device Power over Ethernet Complies with IEEE 802.3af Power over Ethernet End-Span PSE Up to 8 IEEE 802.3af devices powered ...
1.4 Specifications FSD-808P Model 8-Port 10/100Mbps PoE Fast Ethernet Switch Hardware Specifications Hardware Version Network Connector 8-Port RJ45 for 10/100BASE-TX PoE Inject Port 8-Port with 802.3af PoE injector function System: Power (Green) LED Display Per port : PoE (Orange) LNK/ACT (Green)
Before connecting any network device to the FSD-808P, please read this chapter carefully. 2.1 Front Panel The Front Panel of the FSD-808P PoE Ethernet Switch consists of 8x auto-sensing 10/100Mbps Ethernet RJ45 ports. The LED Indicators are also located on the front panel of the FSD-808P.
2.2 Rear Panel The rear panel of the FSD-808P indicates an AC inlet power socket, which accepts input power from 100 to 240V AC, 50-60Hz. 100~240V AC 50 / 60Hz, 3A max. Figure 2-2: FSD-808P Switch Rear Panel 1. The device is a power-required device, meaning it will not work till it is powered.
100BASE-TX Cat. 5, 5e UTP, 2-pair RJ45 Any Ethernet devices like hubs/PCs can connect to the FSD-808P by using straight- through wires. The eight 10/100Mbps ports are auto-MDI/MDI-X, which can be used on straight-through or crossover cable. 3.1 Desktop Installation...
Step 2: Place the Switch on desktop near an AC power source. Step 3: Keep enough ventilation space between the Switch and the surrounding objects. When choosing a location, please keep in mind the environmental restrictions discussed in Chapter 1, Section 4, under Specification. Note Step 4: Connect your Switch to 802.3af complied Power Devices (PD) and other network devices.
Page 12
Step 2: Attach a rack-mount bracket to each side of the Switch with supplied screws attached to the package. Figure 3-2 shows how to attach brackets to one side of the Switch. Figure 3-2: Attaching the Brackets to the Switch. You must use the screws supplied with the mounting brackets.
19” rack. 2. Connect the power cord to the power inlet socket of the FSD-808P and the other end into the local power source outlet. When the Switch receives power, the Power LED should remain solid Green.
3.3.2 Department/ Workgroup PoE Switch: Providing eight PoE in-line power interfaces, the FSD-808P can easily build a power that can be the centrally-controlled IP phone system, IP Camera system and Wireless AP group for the enterprise. For instance, up to 8 cameras can be installed around the corner in the company for surveillance demands or up to 8 Wireless AP to build a wireless roaming environment in the office.
3.4 Power over Ethernet Powered Device 3~5 watts Voice over IP phones Enterprise can install PoE VoIP Phone, ATA and other Ethernet/ non-Ethernet end-devices to the central where UPS is installed for uninterruptible power system and power control system. 6~12 watts Wireless LAN Access Points Access points can be installed anywhere in Museums, Tourist Sites, Airports, Hotels, Campuses, Factories and, Warehouses.
4. Power over Ethernet Overview What is PoE? Based on the global standard IEEE 802.3af, PoE is a technology for wired Ethernet, the most widely installed local area network technology adopted today. PoE allows the electrical power necessary for the operation of each end-device to be carried by data cables rather than by separate power cords.
Page 17
How is Power Transferred Through the Cable A standard CAT5 Ethernet cable has four twisted pairs, but only two of these are used for 10BASE-T and 100BASE-T. The specification allows two options for using these cables for power as shown in Figure 2 and Figure 3: The spare pairs are used.
Page 18
When to install PoE Consider the following scenarios: z You’re planning to install the latest VoIP Phone system to minimize cabling building costs when your company moves into a new office next month. z The company staff has been clamoring for a wireless access point in the picnic area behind the building so they can work on their laptops through lunch, but the cost of electrical power to the outside is not affordable.
Why connecting PoE device to FSD-808P cannot be powered on. Solution: Please check the cable type of the connection from the FSD-808P (port 1 to port 8) to the other end. The cable should be an 8-wire UTP, Category 5 or above, EIA568 cable within 100 meters.
Appendix A Networking Connection A.1 PoE RJ-45 Port Pin Assignments (End-Span) PIN NO RJ45 POWER ASSIGNEMNT z Power + 1 2 3 4 5 6 7 8 z Power + z Power - z Power - A.2 10/100Mbps, 10/100BASE-TX When connecting the Switch to another Fast Ethernet switch, a straight-through or crossover cable might be necessary.
Page 21
The standard cable, RJ45 pin assignment The standard RJ45 receptacle/connector There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation and color of straight cable and crossover cable connection: Straight Cable SIDE 1 SIDE 2 SIDE 1...
: FSD-808P * Produced by: Manufacturer‘s Name : Planet Technology Corp. Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.). is herewith confirmed to comply with the requirements set out in the Council Directive on the...