Mii Port - Planet FSD-1020 Manual

1-10 Introduction

MII Port

To further enhance Desktop Switch FSD-1020 compatibility, an MII
Port (Medium Independent Interface) is located on the rear panel.
The MII port is shared with port #1, when either is in use the other is
disabled. The MII port does not support Auto-Negotiation therefore
the speed and duplex settings must be made manually, through the
Mini-Console.
MII
MII Port
Shared with port1
Figure 1.16 MII Port.
Note: MII Tranceivers are not hot-pluggable i.e do not
connect/disconnect when the device power is ON
PLANET Desktop Switch