About The Switch; System Info - Planet FSD-1020 Manual

Operation
UNIT CONFIG > SYS DEFAULT > <Enter and hold>
The command will reset the switch and the data in EEPROM will be set to the
default values.

About The Switch

System Info

The Mini-Console will auto cycle through systems settings. Press any key to
disable.
When you enter the following command:
UNIT CONFIG > SYS INFO ><Press Enter>
It will display:
Size of DRAM (packet buffer).
TSW version (chipset version).
HW version.
SW version.
FSD-1020 User's Manual
3-27