4.5 Changing Password
The default password of the switch is "admin". For security reason, it is
recommended to change password and the following command configuration is
required:
Switch#config
Switch_config#username admin password planet2017
Switch_config#
4.6 Saving the Configuration
In Managed Switch, the running configuration file stores in the RAM. In the current
version, the running configuration sequence running-config can be saved from the
RAM to FLASH by write command, so that the running configuration sequence
becomes the start-up configuration file, which is called configuration save.
Switch#write
10
Figure 4-7 Setting 1000BASE-FX Screen
Figure 4-8 Changing Password Interface Screen
Figure 4-9 Write Screen