4.1 Installation and Wiring of Optical Shared Hub Unit
4.1.4
AC Power cable connection
AC power (95 VAC to 250 VAC, 50/60 Hz) is received from an external source through
the 3P inlet.
(1) Insert the supplied AC power cable into the 3P inlet of the optical shared hub unit. Do
not supply power in this process.
Optical shared hub unit
4
AC power cable
AC inlet
Figure 4-9 Connecting AC Power Cable
(2) Insert the AC power cable all the way and fit the cable clamp over the power cable.
Optical shared hub unit
AC power cable
Clamp
Figure 4-10 Fastening Cable Clamp
25
6F8C0942