Toshiba V Series Installation And Wiring Manual page 9

Preface
The TOSHIBA Integrated Controller V Series is a new integrated control system
designed for the open rightsizing age. The control technology and computer technology
advanced over many years were combined with a standard multivender network and
simple engineering package software to achieve an easy-to-use open system.
The information and control network TC-net 100 (called the TC-net 100 in this manual) is
a trunk LAN for configuring an Integrated Controller system, and supports a single bus
and dual bus.
This manual describes the installation and wiring of the TC-net 100 and its transmission
parts.
To use each component of the product correctly and safely, be sure to read the Safety
Precautions in advance. Carefully keep the manual after reading it for quick reference
whenever necessary.
In case the TC-net 100 is repaired or any of its parts replaced, it will be charged even
within the warranty period if it arises from consumption or wear
Chapter 1 TC-net 100 Network Configuration
Describes the configuration of the TC-net 100 network and the restrictions.
Chapter 2 TC-net 100 Cabling (Optical Fiber Cable)
Describes the installation and wiring of the TC-net 100 transmission lines of optical fiber
cables inside the cabinet.
Chapter 3 TC-net 100 Cabling (Twisted-Pair Cable)
Describes the installation and wiring of the TC-net 100 transmission lines of twisted-pair
cables inside the cabinet.
Chapter 4 Installation and Wiring of TC-net 100 Parts
Describes the installation and wiring of the transmission parts used for the TC-net 100.
Chapter 5 External Wiring (Twisted-Pair Cable)
Describes the wiring of the TC-net 100 outside the cabinet.
Chapter 6 Grounding
Describes the grounding of the TC-net 100 and its transmission parts.
Chapter 7 At the End of Wiring
Describes the items for confirmation after the wiring.
vii
6F8C0942