4.1.1
Optical fiber cable connection
Connect optical fiber cables with MT-RJ connector to optical connectors (FX1 to FX8).
(1) Remove the dust cover from the optical port to connect. Hold the dust cover with
fingers, and press it till the latch on top clicks.
(2) Insert an optical fiber cable with MT-RJ connector into the optical connector till it
clicks.
(3) Clamp the optical fiber cable.
6F8C0942
Figure 4-2 Removing Dust Cover from Optical Connector
Optical fiber cable
Figure 4-3 Connecting Optical Fiber Cable
4.1 Installation and Wiring of Optical Shared Hub Unit
Optical shared
hub unit
Optical shared hub unit
Optical connector
4
Dust cover
21