Toshiba V Series Installation And Wiring Manual page 46

Chapter 5 External Wiring (Twisted-Pair Cable)
5
34
Place a steel-made separator in a cable duct and separate the power cables from the
trunk cables as shown in figure 5-2.
Trunk cables
Separator
Figure 5-2 Example of Cabling through a Duct
In installing cables in a pit, use a separator as used in cabling through a duct as shown in
figure 5-3.
For the recommended minimum separation distances, conform to the values specified in
Table 5-3.
Transmission or analog signal cables
Figure 5-3 Example of Cable Installation in a Pit
Metal cable duct
Power cables
(Instrumentation power cable, solenoid valve,
operating signal line, etc.)
Separator (steel-made)
Digital signal
Power
cables
cables
Class D grounding (independent
of transmission line grounding)
TC-net 100 Installation and Wiring Manual