Chapter 2 TC-net 100 Cabling (Optical Fiber Cable)
2.2 Wiring Inside the Cabinet
2
8
An example of wiring inside the cabinet using optical fiber cords is described below.
• In a system of dual transmission line configuration using TC-net 100 dual modules, connect
the TN-A of each TC-net 100 module to the line-A transmission line and the TN-B of it to the
line-B transmission line. Avoid mixed connection of TN-A and TN-B.
• For module wiring, refer to the User's Manuals for the individual TC-net 100 modules.
(1) Using a splice box
To connect a TC-net 100 module to a splice box in the cabinet, use an optical fiber
cord which has an MT-RJ connector at one end. Splice the optical fiber cord with the
optical fiber cable in the splice box before external wiring.
6
%
P G
Optical fiber cord with
V
/ 6 4 ,
MT-RJ connector at one
end
»
(2) Using a optical fiber cable with MT-RJ connectors (future)
Connect an optical fiber cable to a TC-net 100 module in the cabinet with its MT-RJ
connector. Pass the optical fiber cable directly outside for external wiring.
O p tic a l fib e r c a b le w ith M T -R J
c o n n e c to r a t b o th e n d s
Caution
Optical fiber cable
»
Cabinet
»
C a b in e t
TC-net 100 Installation and Wiring Manual