Tc-Net 100 Cabling (Twisted-Pair Cable); Twisted-Pair Cabling - Toshiba V Series Installation And Wiring Manual

Integrated controller information and control network module

Hide thumbs Also See for V Series:

Table of Contents

Chapter 3 TC-net 100 Cabling

Connect twisted-pair cables for TC-net 100 transmission. Connect category 5 twisted-

pair cables to the TC-net 100 modules in the cabinet.

If an electrical shared hub unit is installed in the same cabinet, connect the twisted-pair

cable from the TC-net 100 module to the port of the hub unit, and connect a trunk cable

to another port for external wiring.

Use a trunk cable through a relay connector for wiring outside the cabinet, or pass the

twisted-pair cable directly outside.

Use drop cables and trunk cables for wiring in the same building. Do not use them for

outdoor wiring. Use optical fiber cables for wiring outside the building. Indoor wiring is

described below.

6F8C0942

(Twisted-Pair Cable)

Ferrite cores

Figure 3-1 Transmission Line Wiring with Twisted-Pair Cables

Category 5

twisted-pair

straight cables

Electrical

shared hub

Cabinet

Table of Contents

Tc-net 100