Siemens IM 328–N Description page 67

Description
How is the COM ET 200 installed on the PG?
see:
Reference:
((S. 3–2))
Installation of the type file for IM 328–N, slave
For parameterization of the slave interface of the IM 328–N with COM ET
200, the appropriate type file is required. The type files have to be placed in the
directory COM ET 200 and have the following designations:
File name
German
English
French
Spanish
Italian
Note
If the appropriate type file is not contained in the directory of COM ET 200,
please contact your SIEMENS representative.
3.1.2 COM ET 200 parameterization software
Principle
With the ET 200 Distributed I/O System, the master is always configured with
the COM ET 200 configuration software. The parameters for the slaves are
then transferred during system start–up.
Start–up and language selection
After start–up of the COM ET 200 package, the required language can be se-
lected. Five languages are available. After that, COM ET 200 branches to the
screen form FUNCTION SELECTION.
Function selection
This screen form is the main screen form. Here, you are prompted to specify a
program file in which to store the parameters and data entered. Select a name
with up to 6 letters. Blanks are filled in by COM ET 200 (e.g.
"C:BEISP@ET.200").
In this screen form, you can press one of the following softkeys:
F1: Enter the ET 200 system parameters
F2: Configuration
F3: Transfer functions
F4: Plant documentation
F5: Start–up / test
F6: Diagnostics
((S. 3–3))
3-8
/1/, SIMATIC S5 ET 200 Distributed I/O System
Designation
6ZB5 430–0BH02–1AA0 Siemens AG 1996 All Rights Reserved
07.96
SINUMERIK 805SM / 840C (BS)