TrafficView Version 1.00
5
Installation
5.1 Installing the TrafficView
The TrafficView is installed in one standard 80mm (3,15'') cut-out. If there is none, prepare
it according to the picture below.
The length of the M4 screws is limited to 4mm!!!!
5.2 Installing the TrafficView57
The TrafficView57 is installed in one standard 57mm (2,5'') cut-out. If there is none, prepare
it according to the picture below.
The length of the M4 screws is limited to 4mm!!!!
5.3 Connecting LXNAV TrafficView
TrafficView can be connected to any Flarm or ADS-B device with TrafficView cable.
4,5mm
Page 18 of 22
6,3mm
August 2019