TrafficView Version 1.00
4.5.1
Text Edit Control
The Text Editor is used to input an alphanumeric string; the picture below shows typical
options when editing text. Use rotary knob to change the value at the current cursor
position.
Pressing the right push button will move cursor right. Left push button will move cursor
left. At last character position, right push button will confirm edited value, long press to
rotary push button will cancel editing and exit that control. Middle push button will
delete selected character.
4.5.2
Spin Control (Selection Control)
Selection boxes, also known as combo boxes, are used to select a value from a list of
predefined values. Use rotary knob to select the appropriate value.
4.5.3
Checkbox and Checkbox List
A checkbox enables or disables a parameter. Push rotary knob button to toggle the value.
If an option is enabled a check mark will be shown, otherwise an empty square will be
displayed.
Page 8 of 22
August 2019