Management Ethernet Port Leds; Expansion Card Status Led - H3C S5130-HI Series Installation Manual

Table 30 QSFP+ port LED description
LED status
Steady green
Flashing green
Off

Management Ethernet port LEDs

S5130-30C-HI&S5130-34C-HI&S5130-54C-HI&S5130-30F-HI&S5130-30C-PWR-HI&S5130-54C-
PWR-HI
The S5130-30C-HI, S5130-34C-HI, S5130-54C-HI, S5130-30F-HI, S5130-30C-PWR-HI, and
S5130-54C-PWR-HI switches provide an ACT/LINK LED to indicate the operating state of the
management Ethernet port.
Table 31 Management Ethernet port LED description for the S5130-30C-HI, S5130-34C-HI,
S5130-54C-HI, S5130-30F-HI, S5130-30C-PWR-HI, and S5130-54C-PWR-HI switches
Management Ethernet port LED (ACT/LINK) status
Steady green
Steady yellow
Flashing yellow (3 Hz)
Off
S5130-54QS-HI
The S5130-54QS-HI switch provides one LINK LED and one ACT LED for each management
Ethernet port.
Table 32 Management Ethernet port LEDs description for the S5130-54QS-HI switch
LED mark
LINK
ACT

Expansion card status LED

The S5130-30C-HI, S5130-34C-HI, S5130-54C-HI, S5130-30F-HI, S5130-30C-PWR-HI, and
S5130-54C-PWR-HI switches provide an expansion card slot at the rear. The expansion card status
LED on the front panel indicates the operating state of the expansion card.
Description
A transceiver module or cable has been correctly installed in the port and a link
is present on the port.
The port is sending or receiving data.
•
No transceiver module or cable has been installed in the port.
•
No link is present on the port.
•
The port mode LED operates in IRF mode.
Status Description
Off The management Ethernet port is not connected.
Steady green The management Ethernet port is operating at 10/100/1000 Mbps.
Off The management Ethernet port is not receiving or sending data.
Flashing yellow The management Ethernet port is sending or receiving data.
Description
A link is present on the port.
The port is sending or receiving data
The port has failed POST.
No link is present on the port.
79