Table of Contents
Advertisement
Table 2-1: MIC-3385 serial port default settings
Port
COM1
COM2
2.7 Ethernet Configuration (CN20, CN21)
The MIC-3385 is equipped with dual high performance 32-bit PCI-
bus Fast Ethernet interfaces which are fully compliant with IEEE
802.3u 10/100Base-TX specifications. It is supported by all major
network operating systems and is 100% Novell NE-2000
compatible. Two on-board RJ-45 jacks provide convenient
connection to the network.
The medium type can be configured via the software program
included on the utility CD-ROM disc. (See Chapter 3 for detailed
information.)
2.8 USB Connector (CN1)
The MIC-3385 provides two USB (Universal Serial Bus) interfaces
on the front panel, to attach/detach up to 127 external devices. The
MIC-3385 USB interfaces comply with USB specification rev. 1.0
and are fuse protected.
The USB interfaces can be disabled in the system BIOS setup.
The USB controller default is "Enabled" but the USB keyboard
support default is "Disabled".
2.9 Card Installation
The CompactPCI connectors are firm and rigid, and require
carefulhandling while plugging and unplugging. Improper
installation of a card can easily damage the backplane of the
chassis.
The inject/eject handles of MIC-3385 help you install and remove
the card easily and safely. Follow the procedure below to install
the MIC-3385 into a chassis:
2 0
MIC-3385 User's Manual
Address
3F8, 3E8
2F8, 2E8
Default
3F8/IRQ4
2F8/IRQ3
Advertisement
Table of Contents
