Clear Cmos (Jp3); Table 1-1: Clear Cmos - Advantech MIC-3385 Manual

1.6.3 Clear CMOS (JP3)

This jumper is used to erase CMOS data and reset system BIOS
information. Follow the procedures below to clear the CMOS.
1. Turn off the system.
2. Close jumper JP3 (2-3) for 2-3 seconds.
3. Close jumper JP3 (1-2).
4. Turn on the system. The BIOS is reset to its default setting.

Table 1-1: Clear CMOS

CMOS JP3
Clear
1
Normal
Chapter 1 Hardware Configuration9