Table of Contents
Advertisement
2) EPD Setting
Below shows the EPD device information, including EPD device's Mac address,
router SSID/password and Gateway IP. Though the default values are the same as
below, the system offers four operations add node/edit/delete/reload settings as
shown below.
a. "Add EPD Node" button: Turns to general setting page as shown below. Users
should see four written parameters.
i. EPD Mac address: Users can find Mac address on the sticker label on EPD
node and Mac address is a string A to F , 0-9 and string length is 12 byte.
ii. AP SSID: SSID is the user's AP router.
iii. AP Password: Password is defined on the user's AP router and string length
is more than 8 bytes.
iv. Gateway IP: This gateway IP is the 3610W WAN port IP address. Users can
find this information on web page of Status->overview.
b. Button "Edit" : It return to general setting page to modify these settings.
c. Button "delete": The setting Items of the EPD are deleted directly after clicking the
button.
d. Button "Reload Setting" : All EPD settings must choose the "Reload Setting" button
for the system to apply it.
EPD-132 Board User Manual
58
Advertisement
Table of Contents
