Table of Contents
Advertisement
2. If the file uploads successfully, EPD device information is shown on screen. If the
information does not display on the web page , please check file content for any error
symbols.
After importing files, users should click "Reload setting" to let the system apply it.
4.2.7
Hands-on Batch File WISE-3610W Installer
1) EPD Setting
Installer SOP. Follow these 3 steps
Step 01: click "EPD Connection Setting" ->" EPD Setting"-> "Add EPD Node "on web
page
Step 02: Fill in the corresponding information of the EPD Mac address, AP SSID, AP
Password, Gateway IP then save & apply.
EPD-132 Board User Manual
60
Advertisement
Table of Contents
