Table of Contents
Advertisement
Note!
1.
2.
3.
4.
5.
Configure Wi-fi setting through BLE
BLE-WiFi introducer service is a demonstration to setup SSID and password to join a
network by smart phone. EPD-132 will be paired via a BLE GATT server with the
smartphone.Then you can start your Wi-Fi security setting.
Step 1: Install and launch the BLE Scanner app on iOS or Android.
EPD-132 Board User Manual
The default SSID on WISE-3610W & EPD-132 will be the following:
SSID: ADV-ePaper, Password: ePaperePaper
Once WISE-3610W & EPD-132 powers on with the default SSID/
Password setting, EPD-132 will connect to WISE-3610W. EPD-132
will set the default Agent IP according to the Domain from gate-
way after connection.
EPD-132 may have changed the default SSID/Password in some
cases and lost the connection with the gateway. Users need to
maintain the EPD setting list in WISE-3610W before using the BLE
tool to re-config the EPD-132's SSID/Password.
EPD-132 connects to ePaper manager of the ARK2250L through
WISE-3610W's Agent. So we need to setup the Gateway's IP
where the Agent is on EPD setting page, and EPD-132 can con-
nect to the Agent via customer's AP router.
In summary, if EPD-132 only needs to change SSID/Password,
users can use the BLE tool. If EPD-132 needs to setup the Agent
IP connect to ePaper manager of ARK2250L, users need to use
the tool on WISE-3610W refer to #4.2.6. with WISE-3610W/EPD-
132 default setting: SSID: ADV-ePaper, Password: ePaperePaper.
54
Advertisement
Table of Contents
