Table of Contents
Advertisement
Figure 7 Securing the power cord (horizontal power module
slot)
3.
Connect the other end of the power cord to an AC power
receptacle of the power source, and turn on the circuit breaker.
4.
Verify that the power input status LED is ON. If the LED is on,
the power cord is correctly connected. If the LED is OFF,
troubleshoot the installation process.
Removing the power module
To avoid device damage and bodily injury, follow the procedure
in
Figure 8
to remove the power module.
11
Advertisement
Table of Contents
Need help?
Do you have a question about the SecPath AC2500 and is the answer not in the manual?
Questions and answers