Advertisement
(1) Input status LED (AC OK)
(3) Latch
(5) Output status LED (DC OK)
LEDs
The power module has two status LEDs on its front panel.
Table 3 LED description
LED
Input status
LED (AC
OK)
Output
status LED
(DC OK)
Installing and removing the power
module
Safety precautions
To avoid possible bodily injury and power module and device damage,
follow these safety precautions:
•
When you install and remove the power module, always wear
an ESD wrist strap and make sure it makes good skin contact
and is reliably grounded.
Status
Steady green
Off
Steady green
Steady red
Off
(2) AC-input power receptacle
(4) Handle
Description
The power input is normal.
No power input or the power
input is abnormal.
The power output is normal.
The power output is abnormal.
No power output.
3
Advertisement
