2 SCPI Programming
[SENSe:]SECondary:VOLTage[:DC]:RANGe:AUTO
Syntax
[SENSe:]SECondary:VOLTage[:DC]:RANGe:AUTO < mode >[SENSe:]SECondary:VOLTage
[:DC]:RANGe:AUTO?
Description
This command disables or enables auto ranging for secondary DC voltage measurements. Auto ranging is
convenient because the instrument automatically selects the range for each measurement based on the
input signal detected.
Parameters
Name
Type
<mode>
Boolean
Remarks
— Auto range thresholds:
Down range at:
Up range at:
— With auto ranging enabled, the instrument selects the appropriate range based on the input signal
detected.
— Selecting a discrete range (see
ranging.
— The instrument enables auto ranging after a Factory Reset
Return Format
The query command returns "0" (OFF) or "1" (ON).
254
Range of Values
{OFF|0|ON|1}
<10% of range
>120% of range
[SENSe:]SECondary:VOLTage[:DC]:RANGe
Default Value
This is a required parameter
command) will disable auto
(*RST
command).
Keysight 34450A Programmer's Reference