2 SCPI Programming
Return Format
The command reads the condition register and returns a decimal value which corresponds to the binary-
weighted sum of all bits set in the register (see table above). For example, if bit 12 (decimal value = 4096) is
set, this command will return " +4096 ".
Example
The following command reads the condition register (bit 12 is set).
STAT:QUES:COND?
Typical Response: +4096
See Also
STATus:QUEStionable:ENABle
STATus:QUEStionable[:EVENt]?
280
Keysight 34450A Programmer's Reference