2 SCPI Programming
Examples
The following command configures the instrument for 5 kΩ thermistor measurements, triggers the
instrument to take a reading, and then transfers the reading to the instrument output buffer. This 2-wire
measurement is made with 0.1 °C resolution (assumes default temperature units).
MEAS:TEMP? THER,5000,1,0.1
Typical Response: +2.47150000E+01
See Also
CONFigure[:PRIMary]?
UNIT:TEMPerature
FETCh?
READ?
148
Keysight 34450A Programmer's Reference