Keysight Technologies 34450A Programmer's Reference Manual page 133

— If the TRIGger:SOURce
IMMediate), triggers the DMM and returns a measurement.
Return Format
The command returns a single reading.
Examples
The following command configures the instrument for capacitance measurements, triggers the
instrument to take a reading, and then transfers the reading to the instrument output buffer. The default
range (AUTO) and resolution (4½ digits) are used for the measurement.
MEAS:CAP?
Typical Response: +0.04530000E-06
See Also
CONFigure[:PRIMary]?
FETCh?
READ?
Keysight 34450A Programmer's Reference
is set to BUS, the MEASure? command overwrites the BUS trigger (sets it to
2 SCPI Programming
133