Table of Contents
Advertisement
2 SCPI Programming
The following command configures the instrument for 2-wire resistance measurements, triggers the
instrument to take a reading, and then transfers the reading to the instrument output buffer. The 1 kΩ
range is selected with resolution set to 3.00E-5.
MEAS:RES? 1000,3.0e-5
Typical Response: +3.27150000E+02
Keysight 34450A Programmer's Reference
131
- Quick Links:
- Measure[:Primary][:Voltage][:DC]
Hide quick links:
Advertisement
Table of Contents
