Table of Contents
Advertisement
MAN – FD420CV VER HD
Operation Instructions
The FD420CV VER HD is continuously on but can be de-energized by removing power
from the entertainment system. No pilot or aircrew action is necessary during flight or
ground operation.
The passengers will be able to change the video output from the FD420CV VER HD using
the video source button on the display, or remotely with the included IR remote. Point the
IR remote at the top of the LCD to make changes.
When applying 28VDC power, the display will turn on and look for a valid input on the last
known source. If no input is found, the display will go to standby mode. Pressing the Select
button will select new video input.
Button Controls
Located at the bottom (center) of the FD420CV VER HD are 8 buttons. Their functions are
shown below:
BUTTON
1
2
3
4
5
6
7
8
FUNCTION
DESCRIPTION
Power
Toggles the power ON or Off. Also, wakes the display up
from SLEEP mode.
Menu
Opens the MENU.
Auto-adjusts the display's size and position.
Auto
Down
Moves to the next selection in the menu.
Up
Moves to the previous selection in the menu.
Decrease the selection's value in the menu.
Left
Increases the selection's value in the menu.
Right
Source
Switches between sources coming into the display
Rev:
Revision Date:
05/23/2014
M
Page 14 of 21
Advertisement
Table of Contents
