Handling - Gaspardo HL Series Use And Maintenance

ENGLISH
USE AND MAINTENANCE

1.5 HANDLING

If the machine has to be handled, it should be lifted by hooking
cloth ropes to the attachment points provided and using a suitable
hoist or crane with suffi cient capacity (Fig. 2). Because of the
danger involved, this operation should be carried out by trained
and responsible personnel. The mass of the machine is on the
identifi cation Plate (Fig. 1).
Block the indicated lifting devices: insert the proper pin in
the upper hole of the inclined rod and use the splitpin to fi x
it in place (A, fi g. 2).
Stretch the rope to keep the machine level.
The hook points can be detected by fi nding the «hook» symbol.
A
1
2
3
4
5
6
fi g. 2
7

27
cod. G19500473