Handling - Gaspardo ALITALIA 300 Use And Maintenance

ENGLISH

3.3 HANDLING

The Customer must apply the rules envisaged in the European Directives EEC 391/89 and 269/90 and subsequent modifi cations
on the possible risks for loading and unloading operators caused by manual handling of loads.
During handling operations wear suitable personal protection equipment:
If the machine needs to be handled, hook it up to the supplied attachments (Fig. 2) and lift it using a lifting device of suitable capacity. Be-
cause of the danger involved, this operation should be carried out by trained and responsible personnel. The mass of the machine is on the
identifi cation Plate (Fig. 1). The hook points can be detected by fi nding the «hook» symbol (13, Fig. 2). Adjust the length of the belts to
make the machine level during lifting operations.
LIFTING THE SEED DRILL ONLY (Fig. 6)
The belt lengths shown are merely for indication.
Adjust the length of the belts to make the machine level during lifting operations.
Model L1
(cm)
ALITALIA 300 215
ALITALIA 350 215
ALITALIA 400 215
52 - EN
Overalls
L2
(cm)
270
290
310
L2
L1
USE AND MAINTENANCE
ATTENTION
Gloves Shoes
L2

Hardhat
fi g. 6
cod. G19503392