Henny Penny HHC-98 Series Operator's Manual page 15

Remove doors from HHC-983 to allow easier lifting.
2 2 ) )
Lift HHC-983 onto posts of the HHS, making sure the locking casters are
3 3 ) )
towards the front of the unit.
Align the holes in the mounting plates with the holes in the HHC-983. NOTE:
4 4 ) )
The posts of the HHS can be moved, with some effort, to help align the holes in
the mounting plates with the holes in the HHC-983.
Using the bolts and lock-washers provided with the HHS, screw the bolts up
5 5 ) )
under the mounting plates and into the bottom of the HHC-983. Tighten with 7/
16 inch wrench or socket. See
Replace the doors onto HHC-983 and unit is ready for use. See
6 6 ) )
Mounted HHC-983 , page
Figure 2-5 Mounting Plates
Figure 2-6 HHS Bolts Secured , page
Figure 2-6 HHS Bolts Secured
10.
9.
Figure 2-7
9