Alarms - Raymarine e7D Installation And Operation Handbook

11.2 Alarms

Alarms alert you to a situation or hazard requiring your attention.
You can set up alarms to alert you to certain conditions, such as
collision warnings and temperature limits.
Alarms are raised by system functions, and also external equipment
connected to your multifunction display.
When an alarm sounds a message dialog is displayed on your
multifunction display and any networked displays. The dialog states
the reason for the alarm.
You can configure the behavior of certain alarms by selecting the
Edit option on the message dialog or by using the Alarms menu,
accessible from the homescreen via the Set-Up icon.
Silencing/Cancelling alarms
To silence/cancel an active alarm:
1. Select Ok on the alarm message dialog.
Note: Once silenced some alarms may remain active.
Accessing the alarms menu
From the homescreen:
1. Select Set-up.
2. Select Alarms.
The Alarms menu is displayed.
3. Select the appropriate alarm category.
Using alarms and MOB functions
121