Hand Control Operations; Flat Top Tables Only - OAKWORKS Clodagh Gemini User Manual

DIRECTIONS FOR USE

HAND CONTROL OPERATIONS -

FLAT TOP TABLES ONLY

CAUTION
The Flat Top Tables offer height positioning and memory positions with electronic ease. Operate the hand con-
trol as shown below to raise or lower the height of the table.
Height Up
Memory 1 Function
11
When using the table Height Up function, do not place anything between the metal frame and the base
structure as damage can occur to the table.
M E M O R Y F U N C T I O N U S E
Use either of the top 2 buttons to orient the table in a favorite position. To store the
current position in memory, press the MEM button twice (double click). Two audible
beeps will confirm. To recall a stored position, press & hold the MEM button.
Height Down
Memory 2 Function