ADC 400F User Manual page 101

MIB
NAT
NVRAM
octet
PAP/CHAP
PDU
POTS
proxy IP address
PVC
QoS
RFC
RIP
Megabit Modem 400F User Manual
Management Information Base is a set of variables that define the configuration and
status parameters for network management. Network management stations can
retrieve information from and write information to an MIB. The Internet Engineering
Task Force (IETF) specifies standard MIBS for certain types of devices, ensuring any
NMS can manage the devices. Vendors can specify proprietary MIBs for their devices
to fit specific needs.
Network Address Translation provides the means to map private IP addresses to the
public IP addresses (proxy addresses) that are set up for the PPP sessions. Used with
PPP Mode. NAPT is Network Address and Port Translation.
Non-Volatile Random Access Memory is a medium for storing system configuration
information, so the information is not lost when the system is reset.
A TCP/IP term indicating eight bits.
With PAP, the modem sends authentication requests to the service provider and
authentication occurs only once during the life of the link.
In CHAP, the service provider returns an authentication challenge to the modem
during authentication. CHAP can be renegotiated during the life of the link. Also, both
the modem and the service provider must support clear text versions of the
password. The CHAP host field must be the same on both ends of the session.
Protocol Data Unit is data as it appears at the interface between a particular sublayer
and the sublayer immediately below.
Plain Old Telephone Service.
The proxy IP address is the WAN IP address for one of the 32 sessions. The proxy
IP address is used to enter static NAT entries. See IP address.
Permanent Virtual Circuit is a logical connection comprised of a predefined static
route across a packet-switched network that is always in place and always available.
Quality of Service is the configured traffic parameters that are assigned to a virtual
circuit, which specifies how quickly and how accurately data is transferred from the
sender to the receiver.
Request For Comment is a series of notes that contain surveys, measurements, ideas,
techniques, and observations, as well as proposed and accepted TCP/IP protocol
standards. RFCs are available on the Internet.
Routing Information Protocol allows routers to update the routing tables
automatically (for example with information such as how many hops between
destinations). The version of RIP you select for the session must match the version
supported by the service provider. Versions RIP1 and RIP-1 compatible are used for
broadcast. Version RIP 2 is used for multicast.
Appendix D: Glossary
93