ADC 400F User Manual page 47


Select
Enable
addresses. (See
Assign a port priority when you enable
the
EasySession
mode session to determine which has higher priority when sessions are active
simultaneously. Spanning Tree protocol does not allow loops which would occur
with simultaneous sessions on the same network. (You can enable Spanning
Tree, if required, see page
whether or not the service provider indicated
system.)
Ž
Select Enable
IP addresses. (See
see "Routing" on page 66

For Routing
of RIP for intergateway transmissions, as indicated by the service provider
(page 84). See "Routing" on page 66 for more information on RIP.

Enter the assigned
If you are bridging only, The WAN port is automatically assignd the same IP
address as the configured LAN port IP address.
‘
Select the encapsulation method for this transmission over ATM as directed by
your service provider, in compliance with RFC 1483
LLC. (See
information on LLC and VC-MUX.)
2 Click Submit
3 To configure other sessions:
a Click EasySession
configure. (Or, if you want to modify an existing session, click
locate the session you want to modify.)
b Repeat Step 1
Megabit Modem 400F User Manual
to use mode which forwards Ethernet data based on MAC
Bridging
page 84 for the choice you recorded for
page). The port priority is a number you assign to each
page 41
to use Routing mode which forwards IP datagrams based on
page 84 for the choice you recorded for
for more information.)
mode, select the direction you want RIP activated and the version
IP Address and the
"Encapsulation for RFC 1483 Bridging/Routing" on page 66
to accept the WAN Brouter session configuration.
on the Main Menu,
and Step 2 to configure the session.
Bridging
mode and
Bridging
for more details. You recorded on
Spanning Tree
IP Net Mask (subnet IP mask) for this session.
(page
then click Edit by the
Chapter 6: Configuring Sessions
mode.)
(on
Spanning Tree
Bridging
page 84
to be enabled to your
Routing mode. Also,
84). Typically, select
for more
Port 1-32 that you want to
Previous or Next to
39