Figure 4.4 Channels Range Configuration Area - Advantech ADAM-6156PN User Manual

4.3.3.1 All Channel Configuration
For these ADAM-6000 modules, when you click the All Channel Configuration item
in the Module Tree Display area, there will be four parts on the Status Display area.
In the top left-hand corner is the Channels Range Configuration area. You can set
different range for each channel. In the Channels Range Configuration area, select
the channel number in the Channel index combo box, and then select the range in
the Input range combo box. After selecting appropriate range, click the Apply but-
ton. Refer to Figure 5.5 below.

Figure 4.4 Channels Range Configuration Area

In order to remove the noise from the power supply, these analog input modules fea-
ture built-in filter. Two filters with different frequencies are provided to remove noise
generated from different power supplies. The Integration Time Configuration area
is under the Channels Range Configuration area. Refer to Figure 5.6 below. In the
Integration Time Configuration area, you can select suitable filter in the Integra-
tion time combo box. After selecting appropriate filter, click the Apply button.
Figure 4.5 Integration Time Configuration Area
31 ADAM-6100PN Series User Manual