LEFT SIDE
LEFT SIDE
Image 1-3
Note:Only proceed with the next steps if the magnet is oriented incorrectly.
3. Remove the 4 screws (3) of the cover (with handle) and remove the cover. Use a 3 mm
Allen wrench.
Image 1-4
The magnet is now visible.
4. Take out the magnet (4) and turn it 180°. Place the magnet back in the Lamp House.
Page 5 of10
RIGHT SIDE
RIGHT SIDE
2
3
3
FORCE
FORCE
3
3
Barco service bulletin
InfoT: 1160