Important Information; Safety Notices - TrekStor SatCorder Neptune Operating Instructions Manual

OPERATING INSTRUCTIONS

Important Information

Stay up-to-date
Since we are constantly refining the SatCorder software for you, the menus of your SatCorder and the possible
functions may differ from those in these instructions. In case of a software update, you should download the
latest version of the operating instructions from our Website, http://www.trekstor.de. On our Website, you will
also find further information regarding your SatCorder and answers to the most frequently asked questions.
Prevention of "Burn-in"
A long-lasting display of still images (e.g. a paused recording, a screen menu, or a displayed photo) can damage
your television permanently. Plasma screens, rear projection televisions, and CRT televisions are particularly
affected by this problem. You should thus avoid displaying still images on such appliances for long periods of time.
Copyrights
Television programs, films, and other media may be subject to copyright. To avoid copyright violations, you
should inform yourself about the laws that apply in your country.

Safety Notices

For your own safety, read the following notices carefully and follow them when operating your
SatCorder neptune Full-HD 1080i.
Setting Up Your SatCorder
• Only operate your SatCorder indoors.
• Place your SatCorder on an even, stable surface. It may not be near heaters or in direct sunlight.
• Make sure your SatCorder is sufficiently ventilated. Never cover the vent holes in the housing of
the SatCorder. Provide sufficient air circulation at the location of your SatCorder by leaving
enough clearance around it.
• Do not place any objects on your SatCorder. Large objects interrupt the air circulation and small
objects could fall through the vent holes into the SatCorder and damage it.
• Your SatCorder must be protected from moisture, steam, and liquids. Do not place any containers
with liquids near your SatCorder. To clean your SatCorder, do not use a liquid cleaning agent.
Liquid cleaning agents can damage your SatCorder or even cause an electric shock!
Connecting your SatCorder
• Switch off your SatCorder before connecting it to an LNB (low noise block converter) or a multiswitch
for multiple subscriber systems.
• The SatCorder must also be switched off when you connect it to a television or another device.
Power Connection
· Operate your SatCorder only on a mains power with 230 V AC, 50-60 Hz.
Protecting your SatCorder
• In case of thunderstorms, you should switch off your SatCorder and remove the plug and antenna cable.
Please note: Make sure that both the satellite antenna and the LNB are connected to the building lightning
protection system or with a suitable ground connection.
• In case of a longer absence (e.g. when you are on vacation), disconnect the SatCorder from the
mains and your antenna system as a precaution.
Maintenance
• Never open your SatCorder yourself. Otherwise there is a danger of an electric shock.
• Have repairs carried out only by qualified experts since otherwise the warranty may be voided.
• Please keep the original packaging for the safe transport of your SatCorder.
– 33 –
EN