Connecting An External Usb 2.0 Mass Storage Device; Connecting A Video Recorder; Connection To The Power Supply; Basic Settings Of Your Trekstor Satcorder Neptune Full-Hd 1080I - TrekStor SatCorder Neptune Operating Instructions Manual

Full-hd 1080i
Table of Contents

Advertisement

Available languages

Available languages

2.5 Connecting an External USB 2.0 Mass Storage Device

To be able to use the digital video recorder function (USB-PVR) of your SatCorder, please connect an
external USB 2.0 hard disk (e.g. a TrekStor MovieStation or TrekStor DataStation) or a USB stick to the
USB port on the rear side of your SatCorder.

2.6 Connecting a Video Recorder

If you want to connect your SatCorder to a video recorder, please connect it to the second SCART
port or to the composite output.

2.7 Connection to the Power Supply

When you have completed connecting your SatCorder to the satellite system and your audio/video
system, you can then connect it to the power supply.
3 Basic Settings of your
SatCorder neptune Full-HD 1080
TrekStor
Switch on your SatCorder by activating the mains switch on the back side of the device and then
either pressing the standby key on the front side or the a key of the remote control.
When you switch on your SatCorder for the first time, a "q
the basic settings starts. This menu also opens if you reset the SatCorder.
Please use the directional keys l on the remote control to change a setting and the k key to confirm.
Select the menu language first and then the country in which you want to operate the SatCorder.
Next, you can set the date and time manually or select the automatic setting through the time signal
emitted by the satellite.
If you have made both settings, please press D to access the next step of the basic settings.

3.1 User Settings

In this menu, you can make the most important settings of your SatCorder.
Menu Language
Under this menu item, you can select the menu language.
Please note: The menu language has no influence on the language in which the information from the
EPG is displayed.
OSD Transparency
Here you can set the transparency of the OSD (O
the current television image through a screen menu.
Display duration for pop-up information
You can set the display duration of information windows to between 1 and 9 seconds "p
menu item.
S
g
uick
tart
uide
-S
d
), that is, how much you can see of
n
creen
iSplay
– 39 –
i
" menu that helps you with
-
t
Op
up
imeOut
EN
"

Advertisement

Table of Contents
loading

Table of Contents