Change Pin Code; Conditional Access System - TrekStor SatCorder Neptune Operating Instructions Manual

9.2

Change PIN Code

Select this option to change the PIN code.
Please note: If you should forget the PIN code, please call our support.

10 Conditional Access System

If you want to watch encoded channels (e.g. pay TV), you need a Conditional Access Module (CI-CAM)
suited for the desired encoding method and an enabled smart card for the respective channel.
Insert the smart card according to the instructions of the
manufacturer of your CAM into the module. While the
SatCorder is switched off, push the module into one of
the two Common Interface (CI) slots until you notice a
resistance. To remove a CAM, carefully press the eject key
next to the CI slot and remove the CAM.
The communication of a CAM via pop-ups on the screen can be regulated on the "c a S "
OnditiOnal cceSS yStem
menu under the "Settings" menu item. To obtain information on an installed CAM, select it in the
"c a S " menu. You can also make settings for an installed CAM here.
OnditiOnal cceSS yStem
Please note: To guarantee a problem-free reception, you must observe the operating instructions of the
Conditional Access Module and the smart card.
EN
– 57 –