2.3 Connection to the Television
For the connection of your SatCorder to a television, you have several possibilities.
Satellite dish with LNB
VCR/DVD
•
Digital audio/video output (HDMI)
For connection to a HD television, use an HDMI cable that transmits both video and audio signals.
Encoded content is transmitted to your HD television in digital quality only when an HDMI cable is
used. For this purpose, connect the HDMI output of your SatCorder and the HDMI input of your HD
television using an HDMI cable.
•
Component output (YPbPr)
A further possibility for the transmission of HD signals to your television is the use of the component
output. For this purpose, connect the three component output ports to the corresponding inputs
of your television. Please observe that a further connection is needed between your SatCorder and
your television or stereo system for the transmission of audio signals.
•
SCART output
EN
Connect your SatCorder and television using a SCART cable. Both video and audio signals are
output via the SCART output.
•
Composite output
Connect your SatCorder and television using a composite video cable. Please observe that a further
connection is needed between your SatCorder and your television or stereo system for the transmission
of audio signals.
2.4 Connection to a Stereo System
You can connect your SatCorder to your stereo system or television using an analog cinch cable or a
digital S/PDIF cable (optical or coaxial).
HiFi system
Digital Audio
Component Video
Connection
TV
– 38 –
Mains socket
USB 2.0 mass storage device