4 Operation of the
SatCorder neptune Full-HD 1080i
TrekStor
4.1 Channel Selection
You can select a channel by:
•
Entering the number of the channel from the current channel list with the numerical keys (
of your remote control. If you want to select the channel with number 23, for example, press the
keys 2 and 3 one after the other and wait until the channel changes. The numbers you entered
are displayed in a small information box at the top left of the screen so that you can check them.
, or ; key on the front of the SatCorder.
•
Use the
•
Switch to the next or previous channel in the current channel list by pressing the
on your remote control. Alternatively, you can press K or L on the navigation button.
•
In the program list, highlight a channel using
selection with k.
4.2 Setting the Volume
You can increase or decrease the volume of the SatCorder using the e and f keys on your remote
control. When you press the b key, you can turn the sound of your SatCorder on and off.
Please note: The sound also remains off when you change the current channel.
4.3 Resolution
You can adapt the playback resolution of your SatCorder to the resolution of your television.
When you press the n key on the remote control, the current resolution appears first. Every further
press of the n key changes the resolution. This happens in the following order: 576p + 720p + 1080i.
4.4 Program Information (Information Display)
1
2
EN
3
When you change the channel, an information display appears for a short time.
Please note: You can change the duration of this display in the user settings.
You can also turn the pop-up display of this program information on and off by pressing the G key of
your remote control.
K or L on the navigation key and confirm your
5
6
4
– 44 –
0 through 9)
g or the h key