Personal Planner; Adding And Editing Events In The Personal Planner - TrekStor SatCorder Neptune Operating Instructions Manual

8 Personal Planner

The Personal Planner shows you an overview of all planned and active events and information about
the free space on the USB 2.0 mass storage device.
You can start the "p
erSOnal
In the list of the Personal Planner, the name of the program, the date and time of the event, and the recording
function are displayed for all planned events. In the Personal Planner, you can add and delete events.
In the first column of the Personal Planner, the status of an event is displayed:
The event is in progress. This symbol is red in case of a recording and green for a reminder.
There is a problem with this event (e.g. an overlapping with another event).
In the last column of the Personal Planner, the mode of an event is displayed:
Single reminder
Single recording
Weekly
Daily
From Monday to Friday
Series timer: All entries in the EPG with the same title on this channel are recorded. This mode can
only be generated in the EPG.
Reminder: Two minutes before the start a message is displayed; you can then decide whether the
event is carried out or canceled.
Notify

8.1 Adding and Editing Events in the Personal Planner

Press the blue function key to add a new event or select an event with the K and L keys and press
the k key to edit an event.
Use the K and L keys to enter the properties for the event and the k key to confirm a selection.
Please note: Events generated in this way are only timed and not bound to a certain program as is the case
when programming is performed via the EPG.
Type: Here you can select between recording, switchover, and reminder.
Channel: Here you can set the desired channel.
Name: Enter a name for the event using the numerical keys of the remote control.
Start Date: Enter the date of the starting time.
Start Time: Enter the time of the starting time.
p " from the main menu or by pressing the I key on the remote control.
lanner
– 55 –
EN