Table of Contents
Advertisement
Available languages
Available languages
End Date: Enter the date of the end time.
End Time: Enter the time of the end time.
Mode: The event mode can be set to "a
" or "n
". If "a
" is selected, the event starts
utOmatic
OtificatiOn
utOmatic
without notification. If "n
" is selected a query appears on the screen three minutes before the event
OtificatiOn
and the event can be confirmed with the green function key or canceled with the red one. This selection
must then be confirmed again using the k key. If the event if not confirmed, the event is canceled.
Cycle: The event can take place once ("S
"), "d
", once a week ("w
") or "m
f
".
ingle
aily
eekly
Onday tO
riday
8.2 Deleting an Event
To delete an event, select it with the K and L keys and press the red function key. Confirm this selection
in the message that appears with the green function key or cancel the deletion with the red function
key or the D key.
9 Parental Lock
Your SatCorder has a parental lock that lets you limit access to certain settings or programs. This limitation
takes place using a four-digit PIN code. The standard functions such as the reception of non-blocked
programs, the EPG, or the Personal Planner remain completely functional without the entry of the PIN.
If no PIN is set (default setting at delivery), all functions can be used without limitations.
9.1 Setting the Access Rights
EN
Select "S
a
r
" in the parental lock menu. If no PIN is set, you will be prompted to enter a PIN.
et
cceSS
ightS
If the PIN is entered, you can set the following access rights:
Access All: All programs and menus (except "S
a
r
" and "c
pin c
") are accessible to all users.
et
cceSS
ightS
hange
Ode
Lock System Settings: In this mode, all settings are blocked until the PIN is entered.
Lock System Settings + Channels: This mode blocks the settings and all channels marked in the lists.
You must enter the PIN to activate a blocked channel or change settings.
– 56 –
Advertisement
Table of Contents
