Package Contents; Safety Information; Operating Instructions - TrekStor Talon S2 Manual

OPEratING INstrUctIONs

b
Thank you for buying the TrekStor HD SatReceiver Talon S2. We are confident that this product
will be the source of much enjoyment. Please read the following instructions carefully so that
you can become acquainted with the functions of this product and its use.
Current product information as well as a detailed user manual can be found at the TrekStor
website www.trekstor.de.
Have you got questions about the operation or the functions of this product? On the TrekStor
website you can find answers to the most frequently asked questions under "S
You can also get quick assistance by contacting our support. If you want to contact our support, it
i
is best to visit our website, www.trekstor.de, and fill out the support form that can be found under
"S " "S
ervice + upport
detailed your support request is, the quicker and better we will be able to help you!

Package contents

• HD SatReceiver Talon S2
• Remote control
• 2 AAA batteries
• Operating instructions

Safety information

Please read the following information carefully for your own security and follow them while
using your TrekStor HD SatReceiver Talon S2.
Putting up your satreceiver
• Please run your SatReceiver only within buildings.
• Put your SatReceiver onto a plane and solid base. It must not stay next to a heater and
should be protected against direct insolation.
• Make sure that your SatReceiver is ventilated adequately. Never cover the ventilation
slots of the SatReceiver. Please ensure a sufficient air circulation at the location of your
SatReceiver by leaving enough free space around it.
• Do not place any items onto your SatReceiver. Large items may interrupt the air
circulation, while small items might fall through the ventilation slits and damage the
device.
• Your SatReceiver has to be protected against humidity, steam and liquids. Do not place
any vessels filled with liquids next to your SatReceiver. For cleaning do not use any liquid
detergents. They can damage your SatReceiver or even cause an electric shock!
connecting your satreceiver
• In order to avoid damaging your device and the satellite dish, please switch off your
SatReceiver before connecting it with a LNB (Low Noise Block Converter) or with a
multiswitch for a multiple subscriber system.
• The SatReceiver has to be switched off as well when connecting it to a TV or another device.
Power connection
• Connect your SatReceiver only to a power supply system, which is located within the
specifications of 100-240 V AC, 50/60 Hz.
". You can of course also contact us directly by e-mail or telephone. The more
" "FAQ".
ervice +
17 EN