Table of Contents
Advertisement
PMIxxx-F90-...-IO-...
Introduction
1.3
Symbols Used
This document contains symbols for the identification of warning messages and of informative
messages.
Warning Messages
You will find warning messages, whenever dangers may arise from your actions. It is mandatory
that you observe these warning messages for your personal safety and in order to avoid
property damage.
Depending on the risk level, the warning messages are displayed in descending order as
follows:
Danger!
This symbol indicates an imminent danger.
Non-observance will result in personal injury or death.
Warning!
This symbol indicates a possible fault or danger.
Non-observance may cause personal injury or serious property damage.
Caution!
This symbol indicates a possible fault.
Non-observance could interrupt the device and any connected systems and plants, or result in
their complete failure.
Informative Symbols
Note!
This symbol brings important information to your attention.
Action
This symbol indicates a paragraph with instructions. You are prompted to perform an action or
a sequence of actions.
1.4
Intended Use
The PMIxxx-F90 inductive position measurement system with IO-Link is optimized for highly
accurate, continuous position detection. Based on the precise evaluation of several coil
systems, the device combines a proven inductive sensor with innovative microcontroller
technology. Depending on the product variant, the compact design of the F90 enables position
detection tasks to be carried out in a noncontact, wear-free process to a measuring length of 40
mm, 80 mm, or 120 mm.
Note!
The optimum measurement accuracy is achieved at a damping element distance of 0.5 mm ...
1.5 mm.
Only use recommended original accessories.
6
Advertisement
Table of Contents
